Each LED on your camera indicates a different meaning. Moreover, the reason does not depend on the color of the light only, but also on the rate at which these LED lights flash. Similarly, Arlo Camera Blinking Blue may also signify a status change.
Hence, we will learn here in this article how to resolve Arlo Camera blinking Blue Light issue.
What Do The LED Lights Flashing Blue On Arlo Wire-Free, Arlo Pro, And Arlo Pro 2 Indicate?
- Slowly flashing blue lights on your camera indicate no connection to the base station.
- If you see rapid blinks of the blue light on your camera, your connection to the base station has been established.
- When blue light blinks together with Amber, a firmware update is in progress.
- If you are updating the firmware, you should not turn off the camera.
What Does Arlo Blue Light Blinking On Alro Go Signify?
- Alternatively, flashing blue and purple lights on your device indicate you are connected to a cellular network.
- When the blue light blinks with the amber light, you have a firmware update underway. If the user turns off the camera, the update process will get blocked.
- Upon turning on your Arlo Go camera, you will see a slow blue light flash.
- Your Arlo Go camera is ready to scan QR codes if you observe a blue light flashing slowly.
Arlo Blue Light Blinking can signify two different things in different situations. If you have your Arlo Go camera connected either to a charger or the internet.
Does The Blue Flash On Arlo Q Or Arlo Plus Tell Something?
- When your Arlo Q or Arlo Q Plus has a stable blue LED light, it means it is working.
- However, the blue LED light flickers slowly, which means the camera is trying to connect to the internet.
- When your camera is trying to connect to Arlo servers, a faster blue light will appear.
It is now clear why your Arlo Camera Blinking Blue Light. There are many reasons behind Arlo Blue Light Blinking. It is easy to tell the status of your Arlo camera by the rate at which the blue LED light blinks.
Moreover, the “Arlo Camera Blinking Blue Light” issue is commonly seen among users. To fix your Arlo camera that flashes Blue, you are on the right page.
Where Does The Blue Light Come From On My Arlo Camera?
Cameras with blue flashing lights are usually the result of charging issues. There are two simple solutions described in this post that is completely tested. These will undoubtedly help you to solve the Arlo Blinking Blue Light issue. It will be helpful if you follow the steps described below accurately.
As discussed before, many people face the Arlo Camera Blinking Blue issue continuously. Battery issues or hardware problems may cause this.
Nevertheless, the battery may be usually perfect, but the Internet can make it difficult to use the Arlo camera. Alternatively, the Arlo Blue Light Blinking may be due to a network issue and not just a battery problem.
Another well-known fact is that the Arlo camera won’t blink blue until it has no issues with the cable. Occasionally, wires work improperly, thus, leading to distractions.
Also Read: Arlo Camera Blinks Orange
Solutions To Fix Arlo Camera Blinking Blue Light
You don’t have to worry because there are some easy and quick solutions that will definitely help you fix the Arlo Blinking Blue Light with ease.
Take note of each solution and make sure you do not skip any guidelines. When you skip, the same Arlo Blue Light Blinking issue will occur. Put In New Batteries:
Exhausted batteries can cause the Arlo Camera to Blinking Blue, as we discussed earlier. In general, inserting new operating batteries and removing the completely accustomed ones can resolve the issue. With the following steps insert new batteries:
- Unmount or remove the camera from the wall.
- Pull the cover off the battery compartment by pressing it down.
- After that, remove the battery straps.
- Disconnect the batteries.
- You need to wait at least five to six minutes.
- Place the new batteries perfectly now.
- Lastly, check your camera when you have closed the compartment.
Sometimes the problem was not usable batteries, but improper insertion (upside down). Hence, it is possible that you have inserted the batteries incorrectly, so just make sure that you put them in the right way. You will find this helpful.
Arlo Camera Charging:
You can surely use this step if reinserting the batteries didn’t work for you.
Low or improper charging of the camera will result in the Arlo Blue light Blinking, so follow these suggestions carefully:
- Eject the camera from the wall while performing this process.
- If the USB cover is still on the camera (the USB port is on the bottom), it is time to remove it.
- Therefore, connect the USB cable tightly to both ends (Do not damage or destroy the wire).
- Let the Arlo camera charge for at least 30 to 40 minutes.
- Then, mount the camera again.
- It’s now time to test it.
Resynchronize the System:
Is the Arlo Blinking Blue Light issue still a problem for you? Don’t worry, you are very close to dealing with it. The Arlo Blue Light Blinking issue will hopefully be solved with this solution.
Therefore, note that synchronization may not have taken place properly. You can fix this by resyncing your device. A major cause of synching issues is an unstable Internet connection or a low network connection. Hence, while syncing, your network connection should be strong while connecting the device.
You can find the sync button on the Arlo base station, and you need to press it for a certain amount of time. When you press the sync button for a very long time, the USB LED may flicker the red light. It may thus indicate that the camera is having difficulties synchronizing.
The synchronizing system is currently on hold until you see the green light. There is a sync button on the camera also. Hence, you needed to Arlo Camera Blinking Blue push it too for a few seconds. There will be a flickering blue LED light on the camera that confirms the activated adjusting system.
Assuming you see that the LED light is flickering yellow light, it implies that the adjusting system has fizzled and is ineffective. Further, it marks that you need to rehash the interaction.
Next, supposing you witness a strong green light, it will denote a fully and effectively synchronized system
Reset Your Arlo Camera
Now, the final and ever-resolving solution is the resetting process. If your devices are going through any internal glitches, resetting can help to remove them.
Here are the instructions for resetting the Arlo camera:
- Download the Arlo app to your mobile device.
- Select Settings from the menu.
- Go to My Devices and select it.
- Next, select your camera.
- Then select Remove Device.
- Afterward, press the Yes button to accept it.
- Return to My Devices and proceed from there.
- Then click on Add New Device.
- Follow the on-screen instructions after selecting the camera.
Final Thoughts
You can hopefully resolve the Arlo Camera Blinking Blue issue by using the shared solutions. These steps can assure the security of your home. However, if you are still facing Arlo Blinking Blue Light, contact the professionals. In no time, they will have you out of Arlo Camera Blinking Blue Light trouble.