Blink Camera Flashing Red | Get Instant solution

Blink Camera Flashing Red

You must set up your Blink Outdoor Camera properly to keep your home safe. However, you may sometimes see distinct link Camera Blink Camera Flashing Red Redon the Blink Outdoor Camera, which could indicate several different things. You may get concerned when your Blink Outdoor Camera fails to work as it should.

We interpret red blinking lights as an alarming situation in terms of technology.

However, it probably would not be too difficult to fix in this case. Read on to learn why your Blink Outdoor Camera is flashing red and what you can do to troubleshoot the issue.

If your Blink Outdoor Camera is flashing red, it could mean your camera has lost connection with the internet. In another case, it may blink a red light if the battery needs a replacement.

What is the Reason For My Blink Camera Flashing Red?

Blink Outdoor Cameras may flash red for two reasons.

  1. A lost internet connection
  2. An inoperative or faulty battery.

The Blink camera will not record footage if the internet connection is lost. Hence, it is crucial to verify the functioning of your internet connection. 

Besides these two, there are several other reasons why the red light on the camera might blink.

Are You Noticing Blink Camera Blinking Red 3 Times?

When your Blink video camera attempts to connect, a red LED light flashes about 3 times. The setup process usually involves 3-4 long blinks. Therefore when setting up, you can expect three to four long Blink Camera Flashing Red. 

Nevertheless, a Blink camera flashing red five or six times signs that the batteries have failed.

Fortunately, there are simple solutions to these problems, so it should not be cause for concern if your camera begins to flash red.

In addition, the light may also blink six times if the blink cam battery is faulty. Therefore, you need to replace the batteries right away.

Other Reasons For Red Light On Blink Camera:

Listed below are all other likely reasons why the red light on the blinking cam is blinking:

  • The First Set up:

You may be experiencing a blinking red light because you have not yet configured your Blink outside camera. It means the initialization and setup process is still ongoing.

Through the camera setup, a red signal appears on the Blink camera.

The red light flashes briefly during start-up before giving way to a blinking green light. Then, a solid blue light follows the green light, signaling that all is well.

  • Internet Access Issues:

Typically, flashing red lights on exterior cameras indicate a hacked internet connection or a destroyed one.

After completing the setup process, if your camera is flashing red lights, you should check its connection with the Wi-Fi network. Ensure that the link is working appropriately.

When you lose connection with your cam, you can just reconnect it using your mobile app.

  • Deteriorating Batteries:

As soon as the batteries begin to drain out, the LED indicators on the battery-operated Blink outdoor lights will turn red.

Mark it as a warning sign to replace the batteries as soon as possible. 

Alternatively, you may end up with a dead camera earlier than you intended. You won’t need to worry if you keep your battery-operated Blink outdoor cameras well-maintained.

  • Detected Motions:

A motion-sensing Blink camera will light up red after detecting some motion. It is possible to customize the settings according to your preferences. Several people want it checked to confirm that the motion detection cameras work properly.

Some people prefer that their motion detection cameras be undetectable, particularly at night

  • Recognizing a Red Light During the Setup:

The red light on your camera is normal when setting up the Blink security camera system. After a while, the light will go out, signaling that your camera has successfully connected to the internet.

It is important to check your internet connection if the cam continues to Blink Camera Flashing Red. 

  • Not Detecting Motion On Blink Camera

You will see a red light if your Blink Cam does not detect movement. Therefore, you must figure out why your camera doesn’t detect motion.

Blink Camera Flashes Red And Not Recording

Following the blue recording light disappearing, there would be 5 to 6 flashes of red light. So, continue reading the article if you see your Blink camera blink 6 times or the Blink camera blinks 5 times.

It is a normal process that occurs when you turn on the camera. In another case, you may see it while the recording continues.

As soon as the Blink Camera Flashing Red stops flashing, no light will appear on the camera.

It indicates that the batteries have gone dead.

The pattern of lights would be different in case of a lost internet connection. A red light blinks rapidly and continuously when the internet connection is lost. Also, it would be for the short term.

Eventually, the red light will stop flashing after a few flickers.

Is Your Blink Camera Flashing Red? (Here is What You Can Do)

Blink cameras are a significant development in home security, but it can be disconcerting when they blink red. It can happen for several reasons, such as a problem with connectivity. Let us look at the possible fixes for a Blink camera with a blinking red light.

Fixing a Red Flashing Blink Camera and Not Recording?

(On Blink Indoor, Outdoor, and blink XT2 Security Cams)

Follow these instructions to fix your Blink Camera that is not recording but is still Blink Camera Flashing Red.

  • Verify the Internet Connection:

Recent red flashes on your Blink Cam might indicate that your internet connection has dropped. With an internet connection, a mobile app will let you quickly access your Blink Camera Flashing Red.

How to Confirm the Network Connectivity?

  • Go to the “Network and Connectivity” section of your Blink app.
  • To find networks, click the “Search” button.
  • Once it detects the network, tap on the network name once. 
  • Password for Wi-Fi network must be entered next.
  • After that, Tap on Confirm.
  • Wait until the device authenticates the connection.

 

  • Replace the Batteries:

Your camera may also Blink Camera Flashing Red if the batteries are faulty. Battery replacement can be the solution to the problem. The device may start recording but you see the blue light turning into the red after a short while.

This red light appears only for a short time and suddenly disappears. If this is the case, the batteries are either low or dead.

Is your blink camera flashing red with new batteries?

Then you must follow the next step. It is to reset your device and restore it to the factory defaults.

Battery-Saving Tips And Tricks:

  • To avoid battery failure, you should keep track of your battery usage. Tracking your battery usage is important so you can replace it before it runs out.
  • Every time you replace your batteries, you should mark down where you will put them. Thus, you can determine when your batteries are due for replacement.
  • Use a battery of high quality. Always prefer to use only high-grade lithium-ion batteries.
  • Carefully install the batteries. Double-check to verify the correct installation.

Camera Reset Required:

You may perform a hard reset if the above steps have been ineffective. In any case, a hard reset may troubleshoot the Blink Camera Flashing Red issue regardless of the reason. If the camera has any problems or defaults, resetting it means restoring it to factory settings.

Thus, a hard reset can fix any issue with the Blink Camera Flashing Red. 

Also Read: Blink Camera Not Detecting Motion

Method of Resetting The Blink Camera System:

You will find a Reset button close to the USB port on the right side. After pressing the reset button on the device, insert a thin object into the hole. You can use a paper clip to insert into it. Take a moment to allow the process to complete.

Keep holding down the reset button until you see the light turning on the device. The Sync Module will reboot back into setup mode after this action.

The Bottom Line:

Contact the experts if your camera continues to blink Camera Flashing Red despite following all these procedures. You can rely on professionals to resolve Blink Camera Flashing Red your issues. They will connect you with the right people if required.

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *

Contact Us